FACULTY OF ENGINEERINGDEPARTMENT OF METALLURGICAL AND MATERIALS ENGINEERING


Abdullah Öztürk

Prof. Dr. Abdullah Öztürk
Room No: 
E-220
Telephone: 
+90 (312) 210-5932
Fax: 
+90 (312) 210-2518
E-mail: 
abdullah@metu.edu.tr
Education: 
  • Ph.D. University of Missouri-Rolla (1991)
  • M.S. University of Missouri-Rolla
  • B.S. İstanbul Teknik Üniversitesi
Research Interests: 
  • Production, Properties and Characterization of Ceramics
  • Glasses and Glass Ceramics
  • Ceramic Matrix Composites
Publications: 
  • Erdogan, Nursev; Ozturk, Abdullah; Park, Jongee, "Hydrothermal synthesis of 3D TiO2 nanostructures using nitric acid: Characterization and evolution mechanism", Ceramics International Vol 42, (5), 5985-5994, 2016.
  • Agartan, Lutfi; Kapusuz, Derya; Park, Jongee; et al. "Effect of initial water content and calcination temperature on photocatalytic properties of TiO2 nanopowders synthesized by the sol-gel process" Ceramics International,Vol 41 (10),12788-12797, 2015
  • D. Kapusuz, Y. E. Kalay, J. Park, A. Ozturk, “Synthesis and Characterization of Hydrothermally Grown Potassium Titanate Nanowires”, Journal of Ceramic Processing Research, 2015.
  • L. Agartan, D. Kapusuz, J. Park, A. Ozturk, “Effect of H2O/TEOT Ratio on Photocatalytic Activity of Sol-Gel Derived TiO2 Powder”, Nanomaterials and Energy, Vol 2, (6), 280-287, 2013.
  • D. Kapusuz, J. Park, A. Ozturk, “Production of Potassium Titanate Whisker Reinforced Dental Composites”, Ceramics Engineering and Science Proceedings, Vol 34, (6), 35-44, 2013.
  • B. Aysin, A. Ozturk, J. Park, “Silver Loaded Titanium Dioxide Powders Produced Through Mechanical Ball Milling”. Ceramics International, Vol 39, 7119–7126, 2013.
  • D. Kapusuz, J. Park, A. Ozturk, “Sol-gel Synthesis and Photocatalytic Activity of B and Zr co-doped TiO2”. Journal of Physics and Chemistry of Solids, Vol 74, (7), 1026-1031, 2013.
  • T. Tokmakci, A. Ozturk, J. Park, “Boron-Zirconium Co-doped TiO2 Powders Prepared Through Mechanical Ball Milling” Ceramics International, Vol 39, (5), 5893-5899, 2013.
  • J. Park, A. Ozturk, “Bioactivity of Apatite-Wollastonite Glass-Ceramics produced by Melt Casting”, Surface Review and Letters, Vol 20, (1), 1350010-1350017, 2013.
  • N. Bilgin, J. Park, A. Ozturk, “Influence of Particle Size of TiO2 Powder on the Energy Conversion Efficiency of  Dye-Sensitized Solar Cell” Advanced Materials Research, Vol 650, 39-43, 2013.
  • T. Oztas, J. Park, A. Ozturk, “Production of Highly Efficient Photocatalytic TiO2 Powders by Mechanical Ball Milling” Advanced Materials Research, Vol 650, 44-48, 2013.
  • A. Gunes, I. O. Yaman, M. Tokyay, A. Ozturk, Properties of Alinite Cement Produced by Using Soda Sludge. Advances in Cement Research, Vol 25, (2), 104-111, 2013.
  • A. Ozturk, M. Timuçin, “Silicon Carbide Particle Embedded Magnesium Oxychloride Cement Composite Bricks for Polishing of Porcelain Stoneware Tiles”. Advances in Applied Ceramics, Vol 110, 400-408, 2011.
  • M. S. Ozer, A. Ozturk, M. Timuçin, “Production and Characterization of Magnesium Oxychloride Cement Bricks for Fine Polishing of Porcelain Stoneware Tiles”. Industrial Ceramics, Vol 31, 1-10, 2011.
  • K. Soysal, J. Park, S.-H. You, D.-W. Shin, A. Ozturk, “Preparation and Photocataltic Activity of Apatite-Precipitated TiO2” Journal of Ceramic Processing Research, Vol 12, 176-182, 2011.
  • J. Park, A. Ozturk, S.-H. You, S.-S. Park, W.-T. Bae, D.-W. Shin, “Effect of Microstructure on the Tribological Properties of Apatite-Wollastonite Glass Ceramic” Journal of Ceramic Processing Research, Vol 9, 230-233, 2008.
  • A. Ozturk, “Microstructure and Indentation Fracture Toughness of Mica glass ceramics” International Journal of Microstructure & Materials Properties, Vol 3, (6), 780-790, 2008.
  • C. Vakıfahmetoglu, J. Park, F. Korkusuz, A. Ozturk, M. Timucin, “Production and Properties of Apatite-Wollastonite Ceramics for Biomedical Applications” Interceram, Vol 58, (2-3), 86-90, 2009.
  • H.-Y. Chun, S.-S. Park, S.-H. You, G. Hyeon, W.-T. Bae, K.-W. Kim, J. Park, A. Ozturk D.-W. Shin “Preparation of a Transparent Hydrophilic TiO2 Thin Film Photocatalyst” Journal of Ceramic Processing Research, Vol 10, 219-223, 2009.
  • J. Park, G. Pekkan, A. Ozturk, “Friction and Wear Behaviour of Selected Dental Ceramics”, Surface Review and Letters, Vol 16, (5), 653-661, 2009.
  • Z. N. Candan, F. Korkusuz, A. Ozturk, M. Timuçin, E. Bayramlı, C. Durucan, P. Korkusuz, S. Kahraman. “Kemik ve kıkırdak dokusu onarımına yönelik olarak yağ dokusundan farklandırılmış hücre ve seramik/polimer kompozit içeren yapay dokuların geliştirilmesi” Acta Orthopaedica et Traumatologica Turcica 2009, Vol. 43, (Supp-I):64-65, 2009.
  • J. Park, S.-H. You, D.-W. Shin, A. Ozturk, “Tribological Behavior of Alumina-added Apatite-wollastonite Glass-ceramics in Simulated Body Fluid” Materials Chemistry and Physics, Vol 124, 113-119, 2010.
  • J. Park, A. Ozturk, "Effect of TiO2 Addition on the Crystallisation and Tribological Properties of MgO-CaO- SiO2-P2O5-F glasses", Thermochimica Acta, 2008.
  • J. Park, G. Pekkan, A. Ozturk, "Wear of MgO-CaO- SiO2-P2O5-F- based Glass Ceramics Compared to Selected Dental Ceramics", Research Letters in Materials Science, 2007.
  • J. Park, A. Ozturk, "Tribological Properties of MgO-CaO-SiO2-P2O5-F- based Glass Ceramic for Dental Applications", Materials Letters, 61, 1916-1921, 2007.
  • C.H. Gür, A. Ozturk, "Determination of the Influence of TiO2 on the elastic properties of a mica based glass ceramic by ultrasonic velocity measurements", Journal of Non-Crytalline Solids, 351, 3655-62, 2005.
  • A. Ozturk, "The Influence of Ba(PO3)2 Additions on the Refractive Index and Dispersions of Fluoride Glasses", Glass Technology, 41, 3, 106-08, 2000.
  • A. Ozturk, "The Influence of Particle Size of Glass Powder on the Crystallization Kinetic Parameters of Fluorophosphate Glasses", Physics and Chemistry of Glasses, Vol 41, (2) 71-74, 2000.
  • A. Ozturk, "Influence of Ba(PO3)2 on the Formation Characteristics of Fluorophosphate Glasses", Journal of Materials Science, Vol 33, 73-76, 1998.
  • A. Ozturk, "Crystallization Kinetics of Fluorophosphate Glasses -I: Effect of Composition", Journal of Materials Science, Vol 32, 2623-27, 1997.
  • A. Ozturk, "The Influence of Cyclic Fatigue Damage on the Fracture Toughness of Carbon-Carbon Composites", Composites Part-A, Vol 27A, 641-46, 1996.
  • A. Ozturk, " Mechanical Behavior of a Tightly Woven Carbon-Carbon Composite", Science and Engineering of Composite Materials, Vol 4, 169-78.
  • A. Ozturk, Robert E. Moore, ''Tensile Fatigue Behavior of Carbon-Carbon Composites'', Composites, Vol 23, No 1, 39-46, 1992.